Tips For Replacing a Window Handle
It is easy to change your window handle from the at-home comforts of your home. Follow these guidelines to ensure a smooth and beautiful finish.
Start by removing the screw covers to expose the screws within the uPVC window handle. Measure the spindle to make sure you're getting the right size replacement.
1. Take a measurement of the Spindle Length
When you're replacing a window handle it's important to determine the dimensions of the spindle correctly. This is because it will affect how tight or loose the handle is and whether it will lock correctly in the window frame. The spindle is a metal shaft that connects the handle and the lock inside the window frame. The spindle is available in either the standard 8mm cross-section for industry or the more traditional versions that measure 9mm. Modern industry standards are 8mm, however it wasn't always this way. It is essential to check the measurements when buying a new handle.
Take the handle off. This is done by turning the handle to the open position and taking off two screws that secure the handle (which are often hidden behind plastic caps which must be removed). Once the handle is removed, take a measurement from the base to the point at which it ends. This will give you the measurement required to buy a replacement.
There are plenty of options when it comes to choosing a new window handle, from sleek chrome that fits into a contemporary home to traditional brass that looks stunning in restored Georgian rooms, or even the more classic Tudor cottages with curled monkey tail latches! upvc door handle repairmywindowsanddoors.co.uk are endless, but the most important thing is to choose a style that suits your home.
Espag handles are typically fitted to uPVC windows and are identical in size, with 43mm centers (2 fixings). Cockspur handles vary between 58mm and 62mm however luckily there are replacements available for both sizes. Window handles made of Cadenza are a different size since they have an angled blade that operates with a multi-point locking mechanism within the window.
Another consideration when selecting the best window handle is knowing what hand you need, this is simply defined by the hand you use to open the door. Inline Espag handles can be used with right or left-handed windows. Cranked window handles are handed and are only used on windows that open in only one direction.
2. Remove the Handle
A window handle that falls out can be frustrating, whether the handle is damaged or worn out. But the good news is that replacing the uPVC window handle is a very easy task that you can complete yourself. You only need the most basic hand tools and some time to complete this process.
First, you need to open the window and make sure that it's in an unlocked position. Next, you need to remove the screw caps that hold the handle in position. Once the screw caps have been removed then you'll be able remove the handle.
The handle is attached to a spindle inside the window frame. Depending on the kind, this is held in place by a screw or pin. The most popular handles are the inline Espagnolette and the cockspur handles. Both kinds of handles can be found on casement windows, including aluminium ones. You can lock the handles with a key in order to stop unauthorised access from outside. Or you can lock the handles by turning them clockwise.
To remove the handle you will need to use an screwdriver with a flat blade in order to loosen the clip that holds the handle. After the clip has been released, the handle should be able to slide off the spindle. Once the old handle has been removed, you'll need to measure the spindle length and make sure that your new handle will fit.
Once you've determined the correct size for the handle, you can screw it into the correct position. It is important to make sure that the new handle is securely attached and that it turns in the correct way (clockwise for open or counterclockwise for closed). It is also essential to make sure that it isn't fitted upside down.
Replace the cap screws. Once you have done this, you can test the handle to make sure that it functions correctly. You can also test the locking mechanism by moving the handle from the unlocked position to the locked position and then back.
3. Remove the Screws
A uPVC handle is a crucial part of any house and is the first thing to show signs of wear or damage. This could be due natural factors, regular use, or even damage caused by criminals trying to gain access to your home. However, a simple repair is a simple solution and prevent the issue from occurring again.
UPVC handles may also be difficult to open if the locking mechanism isn't functioning correctly. It is often possible to fix the issue by replacing the multipoint locking mechanism instead of the whole handle. This could save you money.
After you have removed the handle, you'll have to take off the screws that held it in place. They're usually on the inside of the base. It is possible to use a screwdriver to do this. Be cautious not to over tighten the handle as this could cause it to loosen.
Then, you'll have to find the pins or screws that secure the handle. They're usually on the inside of the base of the handle. You'll need an instrument to remove them. If you'd like to replace them, you can do so by replacing the screw caps and check the handle to ensure it functions properly.
When you're ready to install the new handle, simply align the spindle with the cutout in the window mechanism and screw in the appropriate position. If you're looking to replace the screw covers, make sure the handle is in a position that is open and that the screws are securely secured. Once you've completed this, you're all done and you can enjoy your new window handle. This should allow you to avoid costly door and window replacements in the near future. If you would like more help in this, or any other aspect of your uPVC windows do not hesitate to contact us.
4. Fit the New Handle
The procedure of replacing a damaged window handle or updating it is easy and can be completed within just a few steps. Identifying the kind of window handle, determining the length of its spindle and knowing what tools you'll require to finish the job are crucial. Safety is always the primary priority when working with windows and tools. It is also essential to be patient and follow the steps with care to ensure you have a functioning handle that is safe to use.
To begin, find the screws that hold the window handle in place. Remove them while holding the handle firmly to stop it from falling down and causing injury. After the screws have been removed, you can put them in a safe place to be replaced later.
After you have removed the handle, you can now begin to put in your new one. It is essential that the handle fits perfectly to ensure that it is functional and secures the window in its place. Next move the metal bar that is square on the handle into the window mechanism hole.
The last step is to replace the caps on the screws and test the handle to make sure it works. If you're not happy with the result or if your window doesn't open and close as it should the next step is to contact our experts who will be able to assist you.
The majority of homes in the UK have uPVC windows. As they are, a lot of them will have to be replaced in the near future due to damage or wear. Anyone with a little DIY knowledge can complete the task. The most crucial aspect to the success of this procedure is to ensure that you're using a handle that matches the existing window in terms of size and design. If you're unsure about what type of handle you require, please contact our team who will be able to guide you through the possibilities available.